SHINESTAR STEEL GROUP CO., LTD

盛仕达钢铁股份有限公司

What material is SA-106B steel pipe

SA106B is steel for boiler steel pipes, SA106B is the American standard, and the standard ASME SA106M is implemented.

Mainly used to manufacture high pressure and higher parameter boiler pipe fittings, low temperature section superheater, reheater, economizer and water cooling wall, etc. Large-diameter pipes are used as steam pipes, headers (economizers, water walls, low-temperature superheaters and reheater headers) with wall temperature ≤450℃, pipeline accessories with medium temperature ≤450℃, etc.

Most of the large diameter pipes in 300MW boilers use SA106C. The parts used by this steel in the Iranian furnace (referring to a single unit) are the steam connection pipe (quantity is 18 tons), the economizer to the drum connection pipe (15 tons), the centralized descending pipe (190 tons), the water wall collector. tank (35 tons), superheater header (22 tons), reheater header (6 tons).

Common standards and material profiles of alloy steel pipes and seamless steel pipes for boilers

Executive standards: GB 3087, GB/T 5310, DIN 17175, EN 10216, ASME SA-106/SA-106M, ASME SA-192/SA-192M, ASME SA-209/SA-209M, ASME SA-210/SA -210M, ASME SA-213/SA-213M, ASME SA-335/SA-335M, JIS G 3456, JIS G 3461, JIS G 3462 and other related standards.
It is used for heating surface of high pressure boiler, economizer, header, superheater, reheater, seamless steel pipe for petrochemical industry, etc.

American standard ASTM A106-ASME SA106 is used to transport high temperature fluids such as water, oil and gas. A106A, A106B, A106C A106gr.b

ASTM A106 A seamless steel pipe chemical composition:

Carbon (C) 0.07-0.13 Silicon (Si) 0.07-0.37 Manganese (Mn) 0.35-0.65 Phosphorus (P) ≤ 0.035 Sulfur (S) ≤ 0.035 Tweezers (Ni) ≤ 0.20 Chromium (Cr) ≤ 0.15 Copper (Cu) ≤ 0.0.250 Molybdenum (Mo)—Vanadium (V)—

ASTM A106 A seamless steel pipe mechanical properties:

ASTM A106 A Seamless Steel Pipe Tensile Strength (MPa) 335-475

ASTM A106 A seamless steel pipe yield strength (MPa) ≥ 205

ASTM A106 A seamless steel pipe elongation (%) ≥ 24

ASTM A106 A Seamless Steel Tube Impact Energy (J)—-


Post time: Jul-21-2022